Hit by Car, Swing Autogate Damaged in Ampang – Can It Still Be Repaired?

 

 

A customer from Ampang recently contacted us after their swing autogate was accidentally hit by a vehicle. The impact caused the gate to come loose and the autogate was no longer in good condition.

After receiving photos from the customer, we noticed that the lower part of the gate bearing had come out from its original position. Before visiting the site, we explained to the customer that we would first check whether the bearing could be repaired. If the damage was too serious, replacement might be required.

When our technician arrived and inspected the swing autogate, we found that the gate bearing was still repairable. Using the correct welding method, we successfully secured the bearing back into its original position.

After completing the repair, we tested the swing autogate several times to make sure the gate could open and close smoothly and safely.

 

 

Swing Autogate Arm Problem Found During Testing

 

During the testing process, we noticed that the swing autogate arm was making a loud noise and moving slower than normal. We asked the customer whether the arm had the same problem before the accident. The customer confirmed that it was working perfectly before the gate was hit.
After checking carefully, we found that the autogate arm had also been damaged by the impact and could stop working anytime. To prevent future problems, we recommended replacing the damaged arm with our Tronica® 929 Arm Autogate System, which matched the size and specification of the customer’s existing system.

The customer agreed to replace the damaged left-side arm with a new Tronica® 929 Arm Autogate.
Because our technicians always carry commonly needed autogate spare parts, we were able to complete the additional repair during the same visit without asking the customer to wait for another appointment.

 

 

 

Complete Autogate Repair Service You Can Trust

 

Many people think an autogate problem is only related to the motor. However, an autogate system has many important parts working together. Problems can also happen to the gate bearing, roller, track, bracket, wiring, control board or arm system.

With almost 30 years of experience in the autogate industry, Dr Autogate has handled different types of autogate problems for homes, factories and commercial properties. Whether your autogate has a damaged arm, broken gate bearing, stuck roller, faulty control board, remote control problem, wiring issue or motor failure, our experienced team can inspect the actual cause and provide the right solution.

Our goal is simple: repair your autogate properly without unnecessary replacement costs. We also provide complete autogate installation and replacement solutions. For swing and folding gates, we supply Tronica® 828 Stainless Steel Arm Autogate System and Tronica® 929 Arm Autogate System. For sliding gates, we provide Tronica® DC Sliding Autogate System and Tronica® AC Sliding Autogate System.

 

 

 

 

 

 

Need Autogate Repair in Klang Valley?

 

If your autogate is damaged, making strange noises, moving slowly or unable to operate normally, you can contact Dr Autogate for assistance.

Simply take a few photos of your autogate and motor, then send them to us through WhatsApp. Our team will review the problem and arrange a suitable appointment.

Dr Autogate: 012 – 295 6299
WhatsApp: https://wa.me/60122956299

Dr Autogate provides professional autogate repair services in Ampang, Kuala Lumpur, Selangor and Klang Valley areas.

Need autogate installation? Need autogate repair? Call Dr Autogate.

 

Auto Gate Cheras – Salah Satu Servis Menggantikan Folding Auto Gate Roller

 

Job tukar roda autogate kami kali ini di Cheras dimana folding auto gate wheels yang bermasalah dan sudah berkarat serta auto gate roller hampir tercabut jadi customer telah mendapatkan servis kami untuk lakukan auto gate roller replacement. Asalnya customer menggunakan metal auto gate roller dan customer beritahu sepanjang menggunakan folding auto gate ini, sudah beberapa kali tukar auto gate roller dan ia dilakukan oleh kontraktor pagar yang sama. Kemudian ada kawan syorkan, cuba panggil autogate company, itu yang customer mempercayai kami.

Dirumah customer ini di Cheras ada dua job yang kami perlu lakukan, pertama replace auto gate roller roller, kami guna 304 stainless steel auto gate wheel dan kemudian customer juga minta kami tukar bateri autogate, katanya beberapa hari lepas hujan lebat, satu rumah trip, kemudian nak keluar beli sesuatu tapi autogate tak boleh buka. Masa ada eletrik semula barulah autogate boleh jalan. Tak lama pun masa yang kami ambil untuk selesaikan dua perkara ini.

Kemudian job autogate kami diteruskan di Taman Melawati Ampang untuk tukar 2 unit arm autogate lama dengan Tronica® 929 Arm Autogate.

 

 

 

Kami Bantu Baiki Autogate Anda Di Klang Valley

 

Setiap hari team Dr Autogate bergerak ke banyak lokasi sekitar Klang Valley untuk membantu customer yang memerlukan servis autogate. Ada customer yang perlukan repair autogate sebab gate tak boleh buka dan ada juga yang hubungi kami untuk tukar roller gate yang sudah rosak atau haus. Kami juga ada lakukan pemasangan Tronica autogate hampir setiap hari. Disebabkan kami menerima pelbagai jenis kes setiap hari, kami memang sentiasa bersedia dengan pelbagai spare parts autogate di dalam kenderaan servis kami. Untuk job yang sudah confirm appointment, technician akan siap standby spare parts atau set autogate baru lebih awal sebelum bergerak ke lokasi customer supaya bila sampai nanti boleh terus mula kerja tanpa buang masa. Ini juga membantu proses repair jadi lebih cepat dan lancar.

Selain itu, kami juga sentiasa membawa spare parts penting seperti arm autogate, motherboard autogate, transformer, remote control, remote receiver, bateri autogate dan roller gate kerana banyak kes tambahan boleh berlaku semasa pemeriksaan dibuat. Kadang-kadang customer ingat masalah kecil sahaja, tapi bila kami check rupanya ada komponen lain yang sudah lemah atau rosak. Sebab itu kami lebih suka datang dengan persediaan lengkap supaya masalah boleh terus diselesaikan pada hari yang sama. Kami memang cuba elakkan datang banyak kali kerana ia boleh melambatkan kerja, membuang masa customer dan menambah kos. Ada customer yang decide nak pasang autogate baru juga dan kami bolleh pasang autogate tersebut on the spot. Dengan pengalaman bertahun-tahun dalam bidang autogate, kami tahu betapa pentingnya servis yang cepat, kemas dan terus siap.

 

 

 

Penyelesaian Masalah Autogate Untuk Pelbagai Jenama

 

Kami lakukan servis baiki, pasang autogate serta ada spare parts untuk pelbagai jenama autogate seperti Tronica®, kron, fbm, mexigate, dcmoto dc925, dcmoto dc975, dnor 212, dnor 712, dnor 212k, oae 333a, gforce sliding autogate, valet technology autogate, dea gulliver sliding autogate, victor autogate, mag autogate, good 1 autogate dan banyak lagi. Hubungi kami, nyatakan apa yang anda perlukan, kami sedia membantu.

 

 

 

 

Kami menyediakan auto gate repair service Klang Valley! Baiki autogate anda dengan 3 langkah

Dapatkan bantuan untuk memperbaiki autogate anda dalam 3 cara ini

1. Ambil beberapa gambar autogate dan motor anda (dari kedua-dua bahagian)
2. Hantarkan gambar tersebut melalui Whatsapp pada https://wa.me/60122956299
3. Kami akan menghubungi anda untuk menetapkan masa untuk kami memberi servis

Apa yang anda fikirkan lagi, cepat hubungi Dr Autogate 012 – 295 6299 untuk penyelesaian masalah autogate anda.

Nak Pasang Autogate, Nak Servis Autogate.. Call lah Dr Autogate!

Swing Autogate Ampang – New Tronica® 929 Autogate Installation

 

 

One of yesterday’s installations brought our team to Ampang, where we replaced an old underground swing autogate with a brand-new Tronica® 929 Arm Autogate System. The homeowner, Mr. Yusuf, had actually stopped using his underground autogate almost one year ago. Instead of repairing it again, he simply opened and closed the gate manually every day.

When Mr. Yusuf contacted us, we first requested photos of the existing system. It was easy to see that the underground motors had not been used for a long time. The motor area was covered with dried leaves and grass, confirming that the system had been sitting idle for quite some time.
According to Mr. Yusuf, the previous underground autogate had been repaired several times over the years. Eventually, the repeated breakdowns became too troublesome, so he decided to stop using it altogether.

Recently, however, a friend recommended the Tronica® 929 Arm Autogate System after sharing his own positive experience with its durability and reliability. That recommendation gave Mr. Yusuf the confidence to finally upgrade his autogate instead of continuing to struggle with manual operation.

Ready Stock Means Faster Installation

 

When Mr. Yusuf called us, his first question was simple:
“How soon can you install it?”
The good news was that Tronica® 929 Arm Autogate Systems are always available in ready stock.
Since we had an available installation slot the following day and Mr. Yusuf was free, we scheduled the installation immediately.

Our technicians removed the old control box together with the existing control board, transformer, battery, remote receiver and related components before installing a brand-new Tronica® control box set.

As for the old underground motors, there was no need to remove them. We left them in place and simply routed new cables to connect the Tronica® swing arms. This reduced unnecessary work while ensuring a clean and professional installation.

After completing the installation, we carefully tested the entire system to ensure both gates opened and closed smoothly. Everything worked perfectly, and Mr. Yusuf was pleased to have his autogate back after nearly two years.

Thinking About Using Your Autogate Again?

Many homeowners stop using their autogates after repeated repairs, especially older underground systems that have become unreliable over time. Fortunately, replacing the old system doesn’t always require changing the gate itself.

The Tronica® 929 Arm Autogate System is an excellent upgrade for swing and folding gates. Built with heavy-duty components and designed for long-term reliability, it offers smoother operation and lower maintenance compared to many older systems. If your existing autogate has been left unused for months or even years, upgrading to a modern arm autogate could be the most practical solution.

Professional Autogate Installation in Ampang & Klang Valley

At Dr Autogate, we install new autogate systems and repair almost every major autogate brand throughout Selangor and Kuala Lumpur. Whether you’re replacing an old Ranger underground autogate, upgrading from another brand, or installing a completely new system, our experienced technicians can recommend the most suitable solution for your home.
We maintain ready stock of Tronica® Autogate Systems, allowing us to complete many installations without long waiting times.

If your autogate no longer opens, has become unreliable, or you’re simply tired of operating your gate manually, we’re here to help.

Dr Autogate – Mr. Alex: 012-295 6299
WhatsApp: https://wa.me/60122956299

Need a new autogate or professional repair? Contact Dr Autogate today and let our experienced team restore the convenience and security of your home.

Swing Autogate Ampang – Replace Old Underground Autogate with Tronica®-929 Arm Autogate System

 

 

One of our recent autogate projects was the installation of a new Tronica®-929 Arm Autogate System in Ampang to replace an old swing underground autogate system.This story started when Mr. Yusuf contacted Dr Autogate looking for a new autogate solution.Previously, Mr. Yusuf was using a Ranger underground autogate system, but he had already stopped using it for almost two years. During that period, he had to manually push and pull the gate every day whenever he needed to leave or return home.

When we requested photos of the old underground autogate system, we could immediately see that it had been unused for a long time. There were dry leaves, grass and dirt around the underground motor area, showing that the system had been left untouched for quite some time.

According to Mr. Yusuf, the old underground autogate had caused many problems before and required several repairs. After experiencing repeated breakdowns, he eventually lost confidence in using the system and decided to operate the gate manually instead.

However, after hearing recommendations from his friend who had a good experience with our autogate system, Mr. Yusuf decided it was time to install a new and more reliable autogate. His friend recommended him to contact Dr Autogate for the Tronica®-929 Arm Autogate System.

Fast Installation with Ready Stock Tronica®-929 Autogate System

 

When Mr. Yusuf contacted us, his first question was:
“How soon can you install the new autogate?”
He shared that living without an automatic gate was inconvenient, but previously he was unsure whether he should invest in a new system again after his bad experience with the old underground autogate.

We assured him that the Tronica®-929 Arm Autogate System was available in ready stock, and installation could be arranged quickly. After confirming the order and payment, we arranged the installation at the earliest available slot. Fortunately, both our team and Mr. Yusuf were available, so we were able to complete the installation the following day.

Professional Underground Autogate Replacement Process

 

 

During the installation, our team first removed the old autogate control box, including the old control panel, transformer, battery, remote controls and receiver. For the existing underground gearbox motor, we decided not to remove it completely. Instead, we kept it in place and prepared the necessary cable connection to work together with the new Tronica®-929 Arm Autogate System.
After completing the installation, we carried out full testing to make sure the new autogate system was operating smoothly.

Mr. Yusuf was happy with the result because he could finally enjoy the convenience of an automatic gate again without worrying about frequent breakdowns.

Have You Stopped Using Your Autogate for a Long Time?

 

 

Many homeowners have similar experiences. Their old underground autogate has stopped working, and after repeated repairs, they eventually give up using it and return to opening the gate manually.
If your old autogate system has been unused for years, don’t worry. You can bring back the convenience of an automatic gate with a new Tronica®-929 Arm Autogate System.

Designed for swing gates and folding gates, the Tronica®-929 is a heavy-duty autogate system built with durable and high-quality components for long-term daily use. Currently, Dr Autogate also offers autogate installation packages that include professional installation. Our team will handle the installation process neatly and professionally, allowing you to enjoy your autogate again with peace of mind.

Trusted Autogate Installer in Selangor & Kuala Lumpur

 

 

At Dr Autogate, customer trust is our biggest motivation. Every day, we help homeowners replace old and unreliable autogate systems with the Tronica® Autogate System. We also provide repair services for autogate systems installed by other companies.

Whether your problem involves:

• Autogate cannot open
• Autogate not responding
• Damaged gate rollers
• Roller coming off track
• Faulty motor or control board
• Remote control or battery issues  

Our experienced team is ready to inspect and provide the right solution. We keep Tronica® Autogate systems in stock, allowing us to arrange installation quickly whenever customers need a replacement.

 

Dr Autogate – Install New Autogate, Repair Existing Autogate

 

Whether you need a new autogate installation, underground autogate replacement, or autogate repair service, Dr Autogate is here to help. We provide professional autogate services throughout Ampang, Selangor and Kuala Lumpur.

Take photos of your autogate and motor from both sides.
Send the photos to us via WhatsApp: https://wa.me/60122956299

 

Autogate Klang – Sistem Swing Autogate Lama Rosak

 

Autogate memang dah jadi satu keperluan untuk kebanyakan rumah sekarang, lebih-lebih lagi bila dah biasa guna setiap hari. Macam kes customer kami dari Klang ni, dah gunakan sistem swing stainless steel autogate di rumah beliau hampir 6 tahun. Dari apa yang customer beritahu, dia baru sahaja cat pagar untuk bagi cantik sebab dah berkarat. Tak lama lepas tu, autogate pula bermasalah.

Bila customer hubungi kami, beliau beritahu mungkin ada masalah pada sebelah arm autogate dan juga autogate remote control sebab sistem dah tak respon macam biasa. Kami pun minta beliau hantarkan beberapa gambar keadaan autogate untuk kami periksa terlebih dahulu sebelum datang ke rumah. Dari gambar yang diberikan, memang jelas nampak sistem autogate tu sudah agak lama digunakan dan tambahan banyak masalah autogate.

Sekiranya customer masih ingin baiki autogate tersebut, kami masih ada spare parts, jika arm autogate itu rosak, kami boleh tukar sebelah autogate arm sahaja tapi guna jenama autogate lain dan untuk remote autogate, kami boleh tukar remote set autogate baru. Jika nak dibandingkan kos baiki autogate dengan pasang set autogate baru, adalah lebih baik pasang autogate baru.

 

Pasang Tronica®-929 Arm Autogate System Lebih Berbaloi

 

Kami cadangkan kepada beliau untuk gunakan Tronica®-929 Arm Autogate System. Model ni memang sesuai untuk rumah yang sebelum ni guna sistem lama dan nak upgrade kepada autogate yang lebih moden serta tahan lasak. Selain tu, control box dia pun lebih kemas dan dilengkapi dengan high quality autogate control board, transformer 12v, 433Mhz remote receiver bersama 3 unit remote control serta backup battery 12v7ah. Sistem ni juga lebih stabil dan smooth bila digunakan setiap hari. Pagar customer dah cat warna hitam, memang sesuai dengan Tronica®-929 Arm Autogate kami.

Setelah mendengar penerangan kami, customer setuju untuk pasang autogate baru. Bila pemasangan siap dibuat, customer memang terus puas hati dengan perubahan yang sangat ketara. Autogate baru ni bergerak lebih senyap, lebih lancar dan nampak lebih moden berbanding sistem lama sebelum ni. Sekarang beliau dah tak perlu lagi bersusah payah buka pagar manual setiap kali nak keluar atau masuk rumah. Bagi kami, kepuasan customer memang paling penting sebab autogate bukan sekadar untuk senang buka pagar, tapi juga bagi keselesaan dan ketenangan setiap hari. Kalau autogate rumah anda pun dah mula buat hal, jangan tunggu sampai rosak terus. Kadang-kadang tukar kepada sistem baru lebih jimat dan lebih tenang untuk jangka masa panjang.

 

Servis Autogate Terbaik Di Selangor And KL

 

Kepada anda yang perlukan pemasangan autogate, Dr Autogate adalah satu satu top autogate company Malaysia yang sudah lama bertapak dalam industri autogate, memang boleh dipercayai. Yang ada masalah autogate dan original autogate installer hilang, kami juga boleh bantu selesaikan masalah autogate dengan mudah, cepat dan berkesan.

Kami bukan sahaja supply auto gate motor and install auto gate system, kami juga melakukan auto gate repair service dengan penyelesaian masalah autogate rosak anda. Sekiranya anda tidak pasti dengan masalah autogate anda, biar kami datang membantu atau anda ingin buat keputusan untuk install new automatic gate system, sistem pintu pagar automatik boleh ke autogate showroom Jalan Kebun kami. Kami merupakan top autogate company in Malaysia, top autogate installer in Jalan Kebun, yang merupakan autogate specialist Jalan Kebun g, selangor yang merupakan autogate supplier Jalan Kebun dengan best auto gate motor in Malaysia.

 

 

 

 

Kami menyediakan auto gate repair service Klang Valley!

Dapatkan bantuan untuk memperbaiki autogate anda dalam 3 cara ini

1. Ambil beberapa gambar autogate dan motor anda (dari kedua-dua bahagian)
2. Hantarkan gambar tersebut melalui Whatsapp pada https://wa.me/60122956299
3. Kami akan menghubungi anda untuk menetapkan masa untuk kami memberi servis

Apa yang anda fikirkan lagi, cepat hubungi Dr Autogate 012 – 295 6299 untuk penyelesaian masalah autogate anda.

Nak Pasang Autogate, Nak Servis Autogate.. Call lah Dr Autogate!